菠萝彩票官网

欢迎来到苏州普一环保科技有限公司官方网站! 中文 English 联系我们 网站地图 关于我们
0512-6983-3832
送设计 保质量 高品质
激光焊接工业吸尘器
您的位置:首页 > 产品中心 > 工业吸尘器 > 激光焊接工业吸尘器

激光焊接工业吸尘器

  • 咨询热线: 0512-6983-3832
  • 产品详情

  • 视频展示

PG-R系列—高负压基本型工业集尘器

PG系列产品采用一体化柜式结构,以高真空度、低噪音为特点,体积小巧美观,专为激光加工、激光焊接、PCB板加工、自动化生产线配套使用而设计的工业集尘器。

   PG series products adopt integrated cabinet structure, featuring high vacuum and low noise, small and beautiful. It is an industrial dust collector designed for laser processing, laser welding, PCB processing, and automated production lines.

Tips: The PG-R  series is just a dust collector, and the suction pipe needs to be designed separately.

Pay attention: All of the following inion is for reference only, the details are subject to final confirmation.

激光焊接工业吸尘器激光焊接工业吸尘器



产品特点Product structure characteristics


涡轮风机,高负压吸尘 Turbo Vacuum Pump

动力系统方面采用国际先进的精铸涡轮风机(气泵),宽压双频,高可靠、低噪音、长寿命、可24小时持续工作。功率从1.5kw-7.5kw可选,电源380V/ 50Hz或220V/50Hz。

The power system adopts the internationally advanced precision-casting turbine motor (air pump), wide-voltage dual-frequency, high reliability, low noise, long life and continuous operation for 24 hours. Power is available from 1.5kw to 7.5kw, power supply three-phase 380V/ 50Hz or 220V/50Hz.


Turbo Vacuum Pump

Turbo Vacuum Pump


滤筒过滤器,高过滤精度 Filter System

过滤系统方面选用滤筒式过滤器,标准配置PTFE覆膜材质,对当量直径在0.3微米以上粉尘过滤效率达99.5%以上。

Filtration system uses filter cartriPGe filter. Standard configuration Japan TORAY PTFE coated filter material. For an equivalent diameter of 0.3 microns or more, the dust filtration efficiency is over 99.5%.


滤筒过滤器

滤筒过滤器

滤筒过滤器


独立清灰门,防止二次污染 Separate cleaning door. Prevent secondary pollution


清灰系统气枪手动清灰方式(如图所示)。为了避免二次污染,机器设计了独立清灰门,打开门拿气枪喷吹滤筒的内表面即可实现灰尘的清理。

Cleaning system: air gun manual cleaning method (as shown in the picture)

To avoid secondary pollution, the machine has been designed with a separate door to clean filter. Open the door and use the air gun to blow the inner surface of the filter to clean the dust on the outer surface of the filter.


Clean  Filter  Schematic

Clean  Filter  Schematic


电控系统,品质保证 Electric control system

电气系统方面,主要电控元件采用国际著名品牌——施耐德产品。电机实现电箱独立控制,内置热过载保护、缺相、反相等相序保护。

The main electrical components of the electronic control system are Schneider brand,Electrical control system with current overload protection and motor phase sequence protection.

 

Schneider partsSchneider parts

Schneider parts


负压监测,清灰提醒 Pressure monitoring, reminding cleaning and maintenance

负压表是专门为工业吸尘器定制,绿、蓝、红分别表示机器内部负压情况,指针指向红色区域代表过滤器需要进行清灰或者更换。

The negative pressure gauge is specially designed for industrial vacuum cleaners. Green, blue and red respectively indicate the internal negative pressure of the machine. The pointer points to the red area to indicate that the filter needs to be cleaned or replaced.


Negative pressure gauge

Negative pressure gauge


抽屉式集尘箱  Drawer type dust box

设备收尘箱采用抽屉式结构,当灰尘积满后打开门板,即可将集尘箱拉出进行灰尘的清理,完成后再将集尘箱送入即可。方便、快捷、实用。

The dust collected by the machine is packed in the dust box. Regularly dispose of the dust in the dust box.


Drawer type dust box

Drawer type dust box


工业脚轮 Industrial wheel

工业移动脚轮是本机标配配件。轮子采用顶级聚氨酯(PU),4寸单个脚轮可以承载150kg,轮面采用纹路设计,增强防滑性能。

Industrial casters are standard accessories for this unit. The wheels are made of top-grade polyurethane (PU), and the 4-inch single caster can carry 150kg. The wheel surface is designed with grain to enhance the anti-slip performance.


Industrial wheel

Industrial wheel


专业静音设计,让设备噪音低于70dB(A)

Professional silent design, making equipment noise below 70dB (A)

本机采用专业降噪设计,在噪音的源头将噪音处理,保证机器运行的稳定性和安静,特别适合于洁净室、电子生产线等需要安静的场合,4.0kw以下噪音可以控制在70dB(A)以内。

This machine adopts professional noise reduction design to process noise at the source of noise to ensure the stability and quietness of the machine. It is especially suitable for quiet rooms, electronic production lines, etc. where quiet is required. For devices with power below 4.0kw, the noise can be controlled within 70dB(A).


Noise reduction design

Noise reduction design


活性炭组件(可选配)Activated carbon assembly (optional)

本机可根据现场客户要求,可以选择增加配置活性炭过滤组件处理有少量异味的烟尘。

According to the requirements of on-site customers, this machine can choose to add activated carbon filter components to deal with smoke with a small amount of odor.


Activated carbon assembly

Activated carbon assembly


技 术 参 数 Technical Parameters

Model

PG-15MR

PG-15R

PG-22R

PG-30R

PG-40R

PG-55R

Power(Kw)

1.5

1.5

2.2

3.0

4.0

5.5

Power Supply(V/Hz)

220/50

380/50

380/50

380/50

380/50

380/50

Max-Vacuum(mbar)

190

200

240

270

290

300

Max-Airflow(m3/h)

210

210

265

318

318

530

Filtration area(m2)

1.8

3.5

8

Inlet diameter(mm)

D50

D50

D75

Dust box volume(L)

15

20

30

Noise dB(A)

70±2

70±2

72±2

73±2

73±2

78±2

Size(mm)

650*600*1055

600*700*1150

重量(kg)

118

115

120

132

138

165


典 型 应 用 Typical application

激光行业:激光焊接配套吸尘、激光切管机配套吸尘、激光切割铝箔、FPC、牛皮纸等吸附吸尘两用。

Laser industry: Laser welding, laser tube cutting machine, laser cutting aluminum foil, FPC, kraft paper, etc. It has two purposes of vacuuming and adsorption.

线路板行业:PCB钻孔机、锣板机、V-cut机配套、FPC切割。

Circuit board industry: PCB drilling machine, boring machine, V-cut machine, FPC cutting.

典 型 应 用

跟此产品相关的产品
友情链接:盛世彩票  盛世彩票官网  平安彩票官网  平安彩票官网  88彩票  盛世彩票  88彩票官网  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!